Step 2-2-2 Configuring Mediant CE Communication Settings Using Web Interface
This section describes how to configure the communication settings between the Mediant CE device and the OVOC server deployed in the AWS Cloud.
The following procedure describes the required configuration for a single CE SBC device. For mass deployment, you can load configuration files to multiple devices using 'Full' or 'Incremental' INI file options (refer to the relevant SBC User's Manual for more information).
|
➢
|
To configure the Mediant Cloud Edition (CE) SBC for AWS: |
|
1.
|
Login to the Mediant Cloud Edition (CE) SBC Web interface or connect from the Devices page in the OVOC Web interface. |
|
2.
|
Open the Quality of Experience Settings screen (Setup Menu > Signaling & Media tab > Media folder > Quality of Experience > Quality of Experience Settings). |
|
3.
|
Click Edit and configure the Keep-Alive Time Interval to 1. |
|
4.
|
Click Apply to confirm changes. |
|
5.
|
Open the TIME & DATE page (Setup menu > Administration tab ) and configure the AWS site IP address/FQDN Domain Name(where the OVOC server is installed) as the NTP server clock source. |
|
6.
|
Click Apply to confirm changes. |
|
7.
|
Open the SNMP Community Settings Page (Setup menu > Administration tab > SNMP folder). |
|
8.
|
Set parameter SNMP Disable to No ('Yes' by default). |
|
9.
|
Click Apply to confirm changes. |
|
10.
|
Open the Mediant Cloud Edition (CE) SBC AdminPage (deviceIPaddress/AdminPage) and configure the following ini parameters: |
HostName = <Load Balancer IP>
SendKeepAliveTrap = 1
KeepAliveTrapPort = 1161
SNMPManagerIsUsed_0 = 1
SNMPManagerTableIP_0 = <OVOC Public IP Address>
|
11.
|
Reset the device for your settings to take effect (Setup menu > Administration tab > Maintenance folder > Maintenance Actions). |